Clarion DXZ575USB - Manual (Page 32)

English
30
DXZ575USB
CD Changer Operations
Note:
• The following operations are the same as for CD
mode:
∗
Pause
∗ Track selection
∗ Fast-forward/fast-backward
∗ Scan play
∗
Repeat play
∗
Random play
See “ CD/MP3/WMA/AAC Operations ” (page 16-
20) for details.
CD changer functions
When an optional CD changer is connected
through the CeNET cable, this unit controls all
CD changer functions. This unit can control a
total of 2 changers.
Press the [ SRC ] button and select the CD
changer mode to start play. If 2 CD changers
are connected, press the [
SRC ] button to select
the CD changer for play.
∗ If “ NO MAG ” appears in the display, insert the
magazine into the CD changer. “ DISC CHECK ”
appears in the display while the player loads
(checks) the magazine.
∗
If “ NO DISC ” appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
Note:
• Some CDs recorded in CD-R/CD-RW mode may
not be usable.
CAUTION
CD-ROM discs cannot be played from every
CD changer, it’s depended on the model.
Displaying CD titles
This unit can display title data for CD-text CDs
and user titles input with this unit.
1. Press the [ D ] button to change the title
display.
Procedure to scroll a title
Set “ AUTO SCR ” to “ ON ” or “ OFF ”.
(The factory default setting is “ ON ”. Refer to the
subsection “ Setting the method for title scroll ”
in section “ Operations Common to Each
Mode ”.)
● When set to “ON”
The title is automatically kept scrolling.
● When set to “OFF”
To scroll just 1 time.
Note:
• User title can’t scroll.
Selecting a CD
1. Press the [ UP ] or [ DN ] button to select a
desired disc in the magazine.
∗
If a CD is not loaded in a slot of magazine,
“
NO DISC ” appears in the display
Other various play functions
● Disc scan play
Disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is cancelled.
∗ Disc scan play is useful when you want to select a
desired CD.
1. Press the [ OPTION ] button.
2. Push the [ SEEK PANEL ] leftward or
rightward to select “ SCN”.
3. Press the [UP] or [DN] button to select
“ALL”, and then press the [ ] button.
“ALL SCN” appears in the display and disc
scan play starts.
● Disc repeat play
After all the tracks on the current disc have been
played, disc repeat play automatically replays
the current disc over from the first track. This
function continues automatically until it is
cancelled.
1. Press the [OPTION] button.
2. Push the [SEEK PANEL] leftward or
rightward to select “RPT”.
3. Press the [UP] or [DN] button to select
“ALL”, and then press the [ ] button.
“ALL RPT” appears in the display and disc
repeat play starts.
DXZ575USB_EN.book 30 ページ ２００６年１２月２５日 月曜日 午後１２時５７分