Sony KV-27TS29 - Manual (Page 18)

Presetting TV Channels
OCMO TV/VIDEO - VOLUME ♦ - CHANNEL ♦ _ o (- c~ 1 ^ m oïïsi^
^ ^ ^ "" • ^ <TAmav
Presetting TV Channels Automatically
Channels that can be received on this TV;
1 Press POWER on the TV or the Remote Commander to turn the TV on.
POWER
O
POWER
&
Set the cable connection on or off, depending on if you want to preset cable
or VHF/UHF channels.
(Follow the steps in ‘Turning the Cable Mode On or Off”, p.17)
Press MENU.
The main menu appears.
MENU
►VIDEO
AUDIO
TIME
SET UP
CLOSED CAPTION
Use ^ Exiti
Press A+ or V- to select SET UP.
Then press RETURN.
The SET UP menu appears.
RETURN
SET UP
►CABLE: ON
AUTO PROGRAM
CH ERASE/ADD
CH CAPTI ON/GUI DE
S VIDEO
VIDEO LABEL
^MENU
If the AUTO PROGRAM display appears in black, the TV is in video mode and you cannot select
AUTO PROGRAM. Press TV or TV/VIDEO to change to TV mode.
Press A+ or V- to select AUTO PROGRAM.
Then press RETURN.
1 5 1 6
f °
T
SET UP
CABLE: ON
►AUTO PROGRAM
CH ERASE/ADD
CH CAPTI ON/GUI DE
S VIDEO
VIDEO LABEL
bMENU
“AUTO PROGRAM” appears on the screen and receivable channels (other than the channels
already preset) are preset In numerical sequence. The channels previously preset will not remain
in the TVs memory.
When no more channels can be found, the programming stops and the lowest numbered channel
is displayed.
To erase unnecessary channels, or to add channels that could not be preset
automatically because their signal was too weak, follow the steps in “Erasing
Unnecessary Channels — CHANNEL ERASE" (pp. 19-20) and “Presetting Only
Desired Channels — CHANNEL ADD” (p. 21).
18
Chapter 1 ; Setting Up