Setting up the table (numeric setup), Setting up the table (numeric setup) -25 – HP 38g Graphing Calculator User Manual
Page 89
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Splitting the
Screen
The Split Screen view gives you two simultaneous views.
1. In the Symbolic view of the appropriate aplet, make sure
the function(s) you want are checkmarked.
2
.
Press
■[VIEWS}.
Select Plot-Table
X
FI
1
J
-.10625
-.6BB66
-.BBHIE
and press {{OK}}.
/ 1
!
h
OEB5
.601575
-!BiHi6
-.62B66
Wli
IESHB13I1I
3. The Q and 0 cursor keys move the crosshairs along the
plot; the view of the table adjusts itself. The Q and [V)
cursor keys move the crosshairs from one graph to
another.
4. To return to a full Numeric (or Plot) view, press |
num
|
(or
I
PLOT
I).
Setting Up the Table (Numeric Setup)
Press ■ [SETUP-NUM] to define any of the settings shown in
the table below. To reset the default values for all table
settings, press ■ [CLEAR].
1. Use the arrow keys to move from field to field. Highlight
the field to edit.
• If there is a number to enter, type it in and press |
enter
|
or
{{OK}}.
To modify an existing number, press
{{EDIT}}.
• If there is an option to choose, press
{{CHOOS}},
highlight your choice, and press |
enter
]
or
{{OK}}.
• Shortcut: Press the
{{PLOT>}}
menu key to copy
values from the Plot Setup into NUMSTART and
NUMSTEP.
2. When done, press
|
num
|
to review the table of numbers.
To reset
To reset the default values for all table settings, press
settings
■[CLEAR}.
Plotting and Exploring Functions 3-25