Craftsman 917.249392 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
1/4- LOCKNUTS
1/4 LOCKNUTS
HINGE
'^PIN
1/4 HEX
BOLTS
1h
FIGURE 12
10 Mount hood hinge to grass catcher cover using (2
1/4 hex bolts and 12} 1/4 locknuts (shown full size
below} (Fig. 12
-
upper inset}
Mount top cover to support post (Fig. 12) using
hinge pin and retainer spring. Retainer spring shown
full size beiow. Hinge pin and retainer spring furnish
ed with grass catcher,
12. Position the grass catcher container assemblies on -
to the support posts through the "L” slots (Fig. 13
- Inset)
Advertising