J^qqcn/iri y – Craftsman 917.249392 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
j^qqcn/iRi Y
Jr »
Smu § W §
JC
f
mm m
PA R TS ID EN TIFIC ATIO N
(V
screwdriver,
6"
(V 3/8" wrench
MOWER BLADE
CLUTCH LEVER
(1) 9/16" wrench
(2j 1/2" wrenches
{21 7/16" wrenches
W 7/8" wrench
NOTE: RIGHT HAND (R.H.)AND LEFT HAND IL.HJARE
DETERMINED FROM OPERATOR'S POSITION WHILE
SEATED ON THE TRACTOR.
ASSEMBLY-MOWER
A
READ THE "SAFETY RULES" CAREFULLY
BEFORE
OPERATING
YOUR
GRASS
CATCHER
DO NOT OPERATE MOWER WITH GRASS
CATCHER
ASSEMBLY
PARTIALLY
INSTALLED
All hardware for mower assembly found In bag labelea
"Mower Deck Hardware"
1
.
Turn ignition key (Fig. 2) to "OFF"position.
A
REMOVE KEY TO PREVENT UNAUTHOR
IZED USE.
MAKE ABSOLUTELY SURE THE BLADES
AND ALL MOVING PARTS HAVE COM
PLETELY STOPPED.
FIGURE 2
2 Push clutch-brake pedal completely into "BRAKE"
position {Fig. 21