Craftsman 113.225931 User Manual
Crrftsmrn, Owners manual, Belt and disc sander
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Save This №nuai
For Future Reference
owners
manual
MODEL NO.
113.225900
BELT AND DISC
SANDER ONLY
MODEL NO.
113.225931
BELT AND DISC
SANDER/WITH
LEGS AND MOTOR
Serial
Number
Model and serial
number may be found
at the right-hand side
of the base.
You should record both
model and serial number
in a safe place for
future use.
CAUTION
Read SAFETY
INSTRUCTIONS
carefully
CRRFTSMRN
BELT AND DISC SANDER
• assembly
®
operating
®
repair parts
Sold by SEARS, ROEBUCK AND CO., Chicago, IL. 60684 U.S.A.
Part No. 68073
Printed m U.S.A,
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- BEFORE USING THE SANDER:
- WHEN INSTALLING OR MOVING THE SANDER.
- BEFORE EACH USE:
- CHECK DAMAGED PARTS. Check for:
- electrical requiremerits
- CONNECTING TO POWER SOURCE OUTLET
- INSTALLING SANDING DISC AND DUST TRAP
- INSTALLING BELT GUARD
- MAKE SURE BELtHÀS NOT SLIPPED OFF OF MACHINE PULLEY FROM STEP 3> DISC AND DUST TRAP INStALLAtlON.
- ON-OFF SWITCH
- INSTALLING BELT DUST TRAP
- 1. ABRASIVE BELT ADJUSTING SCREWS
- 3. WORK TABLE TILT LOCK SCREW locks
- on
- ISC sonder
- asic ©perofion
- trouble shooting