Controls in detail-continued, Ready-light – Nikon SB 14 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTROLS IN DETAIL-continued
Ready-Light (
Built into the back of the SB-14's flash head is a ready-
light which comes on as soon as the flash unit is recycled
and ready to fire. As an additional feature, the ready-
light blinks if the flash fires at its maximum output indi
cating that the light might be insufficient for correct
exposure on Automatic. The warning blinks last for ap
proximately two seconds. In this case, reset the lens aper
ture to the proper f/stop.
Note:
1) With a subject near the hr limit of the usable shooting range, it is
recommended to wait a few seconds after the ready-light comes on
before taking the shot.
2) When the batteries are nearly exhausted, the light output of the
flash unit decreases.
16