Nikon PC NIKKOR 35mm f-2.8 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The aperture and preset rings of the PC-Nikkor enable
focusing at full aperture for the brightest viewfinder
image, with rapid setting of the diaphragm to the pre
set shooting aperture. Having set the preset ring to the
desired aperture setting, focus as follows: Turn the
aperture ring to the f/2.8 setting to open the diaphragm
fully for focusing (photo 1); then turn the focusing
ring until the image on the focusing screen is in sharp
focus (photo 2). Before releasing the shutter, turn the
aperture ring until It contacts the preset ring and can
no longer be turned—the diaphragm is now at the pre
set shooting aperture (photo 3).
Note: The Type E2 focusing screen is highly recommended
for use with FA/FE2/FM3 Nikon cameras and the Type E for
use with F/F2/F3/FE Nikon cameras. The vertical and hori
zontal lines etched on the screen help you to properly align
the camera for proper perspective correction of the image.