Recommended focusing screen, Minimum aperture lock, Oo o – Nikon 4DIF User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

FOCUS LOCK (WITH AN F4-SERIES, F90X/N90s, F90-SERIES/N90 OR
F70-SERIES/N70 CAMERA)

When shooting a subject that is off-center or moving in Continuous Servo Autofocus mode,
press this button to lock focus. To cancel focus lock and reactivate autofocus, remove your

finger from the focus lock button. Although AF-Lock function can be set on both camera and
lens, priority is given to whichever is set first.

FOCUSING LIMIT SWITCH (WITH AN F4-SERIES, F90X/N90s, F90-
SERIES/N90 OR F70-SERIES/N70 CAMERA)

With autofocus operation, you can reduce focusing time by setting the focusing limit switch
according to the pre-determined distance range for the subject(s). There are three focusing limit
zones provided:
Close distance — infinity (■») Set switch to front setting (FULL)

Close distance — 10m

Set switch to middle setting (10 — 5m)

10m — infinity (»o)

Set switch to rear setting (“= — 10m)

RECOMMENDED FOCUSING SCREEN

Various interchangeable focusing screens are available for Nikon cameras to suit any type of lens
or picture-taking situation. Those which are recommended for use with your lens are listed.

-----Screen

Camera ^ ^

A/L

B

c

D

E

Gl

G2

G3

G4

HI

H2

H3

H4

J

K/P

M

R

U

F

T

F4 (with DP-20)

@

o

®

,b

Ó

@ ®

(0)

(->/2)

(o)

(-'/2)

F4 (with DA-20)

®

o

®

[0

o

®

®

@

(-1/2)

@

(-^2)

F3

o o

@

o

o o

®

®

(o)=Excellent focusing
0=Acceptahle focusing

Slight vignetting or moire phenomenon affects screen image, but film image shows no

traces of this.
Acceptable focusing

Split-image rangefinder, microprism or cross-hair area is dim; focus on the surrounding

matte area.

S= Exposure measurement is not possible; lens/screen combination permits focusing operation

only.

( )= Indicates degree of exposure compensation needed for F4-series cameras (Center-

Weighted metering only). For F4-series cameras, compensate using the Exposure
Compensation Dial for the focusing screen. (See the F4/F4s instruction manual, page 78.)

Blank box means not applicable. Since type M screen can be used for both macrophotography
at a 1:1 magnification ratio and for photomicrography, it has different applications than other

screens.

For the K2, B2 and E2 focusing screens, refer to the columns on the K, B and E screens,

respectively. For details, also refer to the specific camera’s instruction manual.

MINIMUM APERTURE LOCK -

-Illust. A

For programmed auto or shutter-priority auto shooting, use the minimum aperture lock lever to

lock the lens aperture at f/22.

1, Set the lens to its minimum aperture (f/22).

2. Slide lock lever in the direction of the aperture ring and so the white dot on the lever aligns

with the orange dot. (See illust.)

To release the lock, slide the lever in reverse direction.

13

Advertising
This manual is related to the following products: