Cisco OL-20949-01 - Manual (Page 86)

9-2
Cisco Unified IP Phone Services Application Development Notes
OL-20949-01
Chapter 9 IP Phone Service Administration and Subscription
Adding a Phone Service
Example
http:// <servername> /ccmuser/sample/sample.asp
Where
<servername> designates a fully qualified domain name or an IP address.
Adding a Phone Service
To access phone service administration, open Cisco Unified Communications Manager Administration
and choose Device > Device Settings > Phone Services:
The Cisco Unified Services Configuration page in Cisco Unified Communications Manager
Administration contains the fields as shown in
Table 9-1 .
Table 9-1 IP Phone Service Configuration Settings
Field Description
Service Information
Service Name Enter the name of the service as it will display on the menu of available
services in Cisco Unified CM User Options. Enter up to 32 characters
for the service name.
ASCII Service Name Enter the name of the service to display if the phone cannot display
Unicode.
Service Description Enter a description of the content that the service provides.
Service URL Enter the URL of the server where the IP phone services application is
located. Make sure that this server remains independent of the servers
in your Cisco Unified Communications Manager cluster. Do not
specify a Cisco Unified Communications Manager server or any server
that is associated with Cisco Unified Communications Manager (such
as a TFTP server or directory database publisher server).
For the services to be available, the phones in the Cisco Unified
Communications Manager cluster must have network connectivity to
the server.
Service Category Select a service application type.
Service Type Select whether the service will be provisioned to the Services,
Directories, or Messages button.
Service Vendor For XML services, you can leave this field blank.
Service Version You can leave this field blank for XML services.