Installing batteries, Installing baheries – Nikon Camera N90 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
INSTALLING BATTERIES
• Make sure the power switch is set
at OFF position.
• NiCd batteries that have "+"
terminals exceeding 6mm in
diameter cannot be used.
• Manganese batteries are not
recommended for use at low
temperatures.
• See page 133 for "NOTES ON
BATTERIES."
Loosen battery holder lock screw
with a coin or similar object.
Remove battery holder.
3
Install four AA-type alkaline-
manganese, NiCd or high
performance manganese batteries with
"-I-” and terminals positioned as
shown inside holder.
Return battery holder to battery
chamber.
Press holder into place as you
tighten lock screw with coin.
13
Advertising