If “fee” blinks in the aperture position, M3 5 o – Nikon N6000 User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4.
Confirm aperture value.
Camera selects correct aperture for
shutter speed selected.
C ^
Ital
m3 5 o
0
Q_
ll
C
1
N [■"/
1
m e D O
_
»
Or
1
0 Q_
J
ll>
If “HI” appears in the aperture position —
Overexposure alert*:
Overexposure may occur. Select higher shutter speed or
use Nikon ND filter.
If “Lo” blinks in the aperture position —
Underexposure alert*:
Underexposure may occur. Select slower shutter speed, or
use a Nikon Speedlight.
If meter has automatically turned
off and LCD indicators disappear,
turn meter on again by lightly
pressing shutter release button.
If “
f
EE” blinks in the aperture position —
Lens setting error alert:
Lens is not set to smallest aperture setting and shutter
locks. Set lens to smallest aperture.
5.
Fully depress shutter release button
to take the picture.
,1
* Electronic analog display appears In both LCD panel and viewfinder to show
I value difference from correct exposure.
41