Controls in detail —continued – Nikon F3 User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CONTROLS IN DETAIL —continued-

18

Shutter speed (sec.)

1/1000 1/500 1/250 1/125

1/60

Aperture (f/number)

4

5.6

11

16

The F3 has two separate settings for time exposures. On
"B," the shutter remains open for as long as the shutter

release button is depressed. On "T," the shutter stays

open until the dial is rotated to another setting, making it

ideal for really long time exposures. Being a mechanical

setting, ”T" will not cause battery drain regardless of how

long the shutter remains open.
"X" provides a shutter speed setting of 1/80 sec. It is used
to provide proper synchronization with electronic flash

units other than the Nikon SB-12.

The amount of lighf reaching the film plane is defermined

by a combination of the shutter speed and the lens
aperture. Since the two are interrelated, different combi­

nations will give the same degree of exposure. A one-step
change in shutter speed, or a one-stop change in aper­
ture setting, will either halve or double the degree of ex­

posure. For example, a shutter speed of 1/125 sec. lets

in twice as much light as a setting of 1/250 sec., and only

half as much light at 1/60 sec. For an aperture setting of

f/11, twice as much light as f/16 and half at much as f/8,

is let in. Thus, if fhe correct exposure for a particular

picture-taking situation is 1/125 at f/11, then 1/60 at f/16
or 1/250 at f/8 will give the same exposure. The following
table illustrates the interrelation between shutter speed

and aperture.

The best combination will depend on the results you

want. Use fast shutter speeds to freeze motion; use slow

speeds to produce a deliberate blur. (See the example

pictures on the opposite page.). Also, small apertures

give greater depth of field, while large apertures restrict
sharp focus to the main subject. (See page 26.)

A good rule to follow in preventing camera shake is to

select a minimum shutter speed which is the reciprocal of

the focal length of the lens in use. For example, when

using a normal 50 mm lens, select a speed no slower than

1/60 sec. (the closest number to 1/50). For a 500mm

super-telephoto, use no less than 1/500 sec., and so forth.

Advertising