Selecting the shutter speed and shooting – Canon A2 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4. Selecting the Shutter Speed and
Shooting
• When you perform continuous photography, use a shutter
speed of 1 /60 to 1 /1000 second.
• For single frame photography, any shutter speed can be
used.
• If using the AE-1 PROGRAM with the shutter speed selec
tor dial set to “PROGRAM” (programmed AE), sequential
shooting is possible if the aperture indicated in the view
finder is 4 or smaller, i.e., 5.6, 8, 11, etc.
• When the Power Winder A2 is used with the Canon A-1,
sequential shooting is not possible when in the stopped-
down AE mode.
• The main switch of the Power Winder A2 must be turned off
to make multiple exposures with the Canon A-1.
2 2