Warning lamp for completion of winding, Rewinding the film – Canon A2 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
5. Warning Lamp for Completion of Winding
When the film roll ends or winding stops incompletely, the
warning lamp lights up. Turn the main switch to “OFF.” Do
not turn the main switch to any other position.
* There may be a rare case when the warning lamp does
not light up.
6. Rewinding the Film
After pressing the film rewind bufton at the bottom of the
winder, rewind the film as usual, turning the camera’s rewind
crank in the direction of the arrow until the film is completely
rewound.
24
Advertising