Major specifications – Canon 420EX User Manual

Page 49

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Major Specifications

Type

Compatible cameras

Flash coverage and Guide No

Recycling time and Hash count

Flash duration ...................

Flash coverage ..

Flash modes ..

Bounce angles

Exposure control modes;

Flash exposure compensation

Flash range ...

.........

(with 50mm 1/1 4 lens at IS0100)

Sync speed

Flash-ready indication.

Flash exposure confirmation.

AF-assist beam range ..

Direct-contact, shoe-mount flash with E-TTL7TTL autoflash

(AF-assist beam, autozoom head, bounce flash, and wireless slave setting

provided)

Type-A EOS cameras (E-TTL autoflash). page 2)

Type-B cameras (TTL auloflash). page 2)

See page 50.

See page 11 and 50

1 2 ms or less with normal flash

Autozoom head is positioned automatically to suit the lens focal length

(24mm, 20mm, 35mm, 50mm, 70mm, and 105mm)

(1) Normal sync

(2) High-speed sync (FP flash)

(3) Test firing
(4) Modeling flash (at 70 Hz for 1 sec )

See page 40

(1) E-TTL autoflash (with Type-A cameras and preflash evaluative metering)

(2) FE lock (with Type-A cameras and preflash evaluative metering)

(3) TTL autoflash (with Type-B cameras and off*the-film flash metering)

(1) Automatic flash output reduction for fill flash.

(2) Enabled with cameras having a flash exposure compensation feature.

(1) With normal sync: 0.7 - 24.2 meters

(2) With high-speed sync: 0 7-127 meters (at 1/180 sec)

See page 52.

Red pilot lamp

Yellow-green lamp

Covers 1,3, 5, or 7 focusing points (covers only a part of the 45-point Area AF)

Wireless slave setting

SE mode ..

Power source: ...

Dimensions (mm)

Weight ..

Range at center

Approx 0.7 - 7 m,

Range at periphery Approx 0 7 -

5 m (in total darkness)

.Slave setting

Wireless selector set to SLAVE

Channels

4

Slave group ID

A. B. C

Reception angle

Approx +/-40° horizontal, +/-30° vertical

Flash coverage

Set to 24mm automatically

Flash-ready indicator AF-assist beam emitter blinks

Exposure control Automatic with the master unit (for E-TTL autoflash)
Test flash

Enabled with

master unit's test firing button

Power turns off automatically after 90 sec of non-use

Power turns on with lest firing button

. ..(1) Four size-AA alkaline batteries

(2) Four size-AA Ni-Cd batteries

* Four size-AA nickel-hydride batteries

• Four size-AA lithium batteries

71 5 (W)

X

123 (H)

X

99 4 (D) mm

2 8 (W)

X

4 82 (H)

X

3 89 (D)

in

300 g /10 6 oz (excluding batteries)

• The above specifications are based on Canon's testing standards

• Specifications and the external appearance are subject to change without notice

49

Advertising