Ij stopping the printing, Resuming the printing, Resolving printing errors – Canon EOS 300 D User Manual
Page 120: Stopping the printing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Direct Printing with DPOF
Stopping the Printing
.............................. ------------------
While [Stop] is displayed on the
LCD monitor, press < ©>.
►
The printing will stop.
►
When the confirmation dialog appears,
press the
keys to select [OK],
then press < © > .
iJ Stopping the Printing
With a card photo printer:
If only one print is being printed, the printing cannot be stopped. If two or
more prints are being printed, the printing will stop with the next print.
With BJ printers:
The printing will stop and the paper being printed will be discharged.
Resuming the Printing
O On the direct printing screen, after printing is stopped, press the
<JiW>
keys to select [Resume], then press < © > .
O Printing cannot be resumed in the following cases:
® Before resuming the printing, you changed the printing options.
® Before resuming the printing, you erased an image that was to be
printed.
® When you stopped the printing, CF card’s remaining capacity was
low.
Resolving Printing Errors
If an error occurs during printing, an error message will appear on the LCD
monitor.
Q If [Resume] is displayed, correct the error, then select [Resume] and
press < © > . After you press <©> and “Stop printing?” appears, select
[Cancel] and press < © > . T h e printing will resume. With certain
printers, the printing may resume automatically.
© If only [Stop] is displayed, press < © > . After correcting the problem,
start over again to print.
118