Metering modes, Lcd panel illumination, 6;-lcd panel illumination – Canon EOS 300 D User Manual

Page 84: Evaluative metering, Partial metering, Centerweighted average metering

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Metering Modes

j

The camera has three metering modes: Evaluative, partial, and
centerweighted average metering.

n

0

□ □ □ □ 0

||

g

Evaluative metering

This is the camera’s standard metering mode suited

for most subjects even under backlit conditions.
After detecting the main subject’s position,

brightness, background, front and back lighting

conditions, camera orientation (horizontal or

vertical), etc., the camera sets the proper exposure.

Partial metering

This is set automatically during AE lock in the

Creative Zone modes.

This is particularly effective when the background is

much brighter than the subject due to backlighting,

etc. This method uses a center area of
approximately 9% of the screen.

© The area covered by partial metering is shown on

the left.

Centerweighted average metering

This is set automatically in the <M> mode.
The metering is weighted at the center and then

averaged for the entire scene.

.0. LCD Panel Illumination

To illuminate the LCD panel, press the

<-§-> button. To turn off the illumination,

press the button again. The illumination

will turn off when you press the shutter

button halfway.

84

Advertising