Checking the batteries – Canon Snappy 50/20 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Check the batteries before using the
camera.
1. Cover the lens area of the camera
\with your hand and press the shutter
button ® halfway while looking
through the viewfinder.
2 If the viewfinder lamp blinks rapidly,
battery power is sufficient.
3. If the viewfinder lamp does not blink,
replace both batteries with new ones.
Using new alkaline batteries at normal
temperatures, you can shoot:
1. Approximately thirty rolls of 36-ex
posure film without flash; or
2. Approximately five rolls of 36-ex
posure film using flash for each ex
posure.
• Replace the batteries when auto film ad
vance and flash recycling become slower
or stop completely.
Checking the Batteries