Basic operation – Canon Snappy 50/20 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
BASIC OPERATION
1. Load the batteries.
2. Open the lens shield.
3. Check the batteries.
4. Set the ASA film speed.
5. Load the film.
6. Look into the viewfinder. Compose the picture so that your
subject is centered in the viewfinder.
7. Press the shutter button halfway. If the red viewfinder
lamp blinks rapidly, switch to flash and wait for the flash-
ready lamp to light up.
8. Press the shutter button all the way to take the picture.
9. At the end of the roll, rewind the film.
Advertising