Canon AE-1 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
12
PRELIMINARY PREPARATION
Attaching the Neckstrap
AttKh the Canon AE-V$ neckstrap by
threading it through the rings and adiustiog it
to the desired ler^gth as irsdicated in the
photos. A case for a spare battery can be
attached to the rteckstrap.
Handling the Lens Cap
The lens cap can be removed from the
front of the lens after pressing in the tabs on
both sides of the cap. The rear dust cover can
be removed by turning the bayonet ring in the
direction of the arrow. To attach the dust
cover, align its slot with the positioning pin
below the red dot of the bayonet ring, and
press it in. When the dust cover is removed,
the bayor^t ring t$ locked.
For an explinabon of how the lens
mechanisms functiort. see page 52.