Canon IXUS 310 HS - Manual (Page 166)

Changing Camera Settings
166
Changing the Start-up Screen
You can change the start-up screen that appears when you turn on the
camera.
z Touch [Start-up Image].
z Touch an option.
Registering Recorded Images as the Start-up
Screen
When you press the 1 button and set the camera to Playback mode, you can
register an image.
z Touch [Start-up Image].
z Touch [2], then touch .
z Drag across the screen to choose an
image, then touch [OK].
X The [Register?] screen will appear.
z Touch [OK].
No start-up image
1
Preset images
(cannot be modified)
2
Preset images
You can set recorded images, and use the
included software to change the images.
Any previously registered start-up image will be overwritten when
registering a new start-up image.
Register the start-up image or sounds with the included
software
The dedicated operation sounds and start-up images on the included software
can be registered to the camera. Refer to the Software Guide for details.