Canon IXUS 310 HS - Manual (Page 72)

Adding Effects and Shooting
72
Changing the Color and Shooting
You can change the look of an image when shooting. However, depending on
shooting conditions, the image may become coarse, or the colors may not
come out as expected.
Color Accent
You can choose to retain a single color and change the rest to black and white
in a composition.
Choose T.
z Follow Steps 1 – 2 on p. 64 to choose T.
Touch .
X The unchanged image and the Color
Accent image will alternately display.
z The color for default settings is green.
Specify the color.
z Position the center frame so it is filled with
the color you want and touch the frame on
the lower part of the screen.
X The specified color will be recorded.
Specify the range of colors.
z Touch op to change the range of colors
to be retained.
z Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
z Touching Ú restores the shooting screen.
In some shooting conditions, such as when shooting moving points of light,
the chosen shape may not show, and the brightness may be different than
expected.
Recorded color
Using the flash may cause unexpected results in this mode.