Multi-spot metering display, Metering modes – Canon EOS 1 V HS User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Metering Modes
Multi-Spot Metering Display
Fixed metering mark
for the first spot meter
reading
Exposure level
indicator (moving)
before the second spot
meter reading is taken.
• This indicator shows
the exposure level
relative to the first
spot meter reading.
Exposure level
indicator (moving)
before the third spot
meter reading is taken.
• This indicator shows
the exposure level
relative to the
second spot meter
reading.
Exposure setting after the second spot meter
reading is taken.
• This is the result (fixed) after the first and
second spot meter readings are averaged.
• This is repeated each time a spot meter reading
is taken.
• The exposure settings obtained with multi-spot meter readings are
canceled in the following cases;
1. After taking the last spot meter reading, 16 seconds elapse.
2. You press the
<[!]>,< MODE >,
or
<
af
>
button.
3. After taking the picture, you take your finger off the shutter button.
Up to eight spot meter readings can be taken for one picture. If you press the
<FEL> button to try and take a ninth spot meter reading, no spot meter reading
will register.
ii Multi-spot metering can be fixed at the center or linked to the active focusing
point with C.Fn-13 (^p.106).
54