Autoexposure bracketing – Canon EOS 1 V HS User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Autoexposure Bracketing
With autoexposure bracketing, the camera automatically changes the
exposure level within the set range (up to ±3 stops in 1/3-stop increments)
for three successive frames. The three bracketed shots are exposed in the
following sequence: correct exposure, underexposure, and overexposure.
The current film advance mode (see “Switching the Film Advance Mode”
on page 77) is used during the bracketing.
Correct exposure (0) Underexposure (-1/3 stop) Overexposure (+1/3 stop)
Press the
<
m o d e
>
button and
<AF> button simultaneously.
► The ^ AEB icon appears on the
LCD panel.
Turn the < ¿Si > dial to set the
desired bracketing amount.
► On the LCD panel, the bracketing
amount is indicated in stops and the
bracketing range is shown on the
exposure compensation scale. The
display shows a bracketing amount of
±1 stop centering on the correct
exposure level. ,-------__
ae
B amount
AEB range
69