Turn this ring to focus on the object – Canon YJ12X6.5B IRS-A User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0 Iris Operation Mode Change-over Switch
Use this switch to change from manual to automatic iris operation and back.
(2) Momentary Auto-Iris Switch (Momentary Automatic Iris Switch)
While pressing this switch, momentary automatic iris operation takes effect.
(D Hood Lock Knob
Loosen or tighten this knob to remove or fix the lens hood on the lens.
(4)
Zoom Seesaw Switch
Use this switch for servo zoom operation.
The zoom speed changes according to how far down the switch is pressed.
(5)
RET Switch (Return Video Switch)
While this switch is held down, the E-E image* from the VTR can be viewed in the
viewfinder. When it is released, the image being recorded by the camera is restored
to the viewfinder.
E-E Image*: An image whose input signals are output straight through the electrical
circuitry inside the VTR without passing through the magnetic converter
circuits of the heads, tape, etc.
(D Macro Button/Macro Ring
Use this button and ring to shoot an object which is closer than the M.O.D.
(D Zoom Lever/Zoom Ring
Use the zoom ring and zoom lever to operate the zoom manually.
(§) Focus Ring
Turn this ring to focus on the object.
(D Zoom Operation Change-over Knob
Use this knob to change from manual to servo zoom operation or vice versa.
44