Та flash exposure compensation, Set the flash exposure – Canon EOS 7 User Manual
Page 76
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using the Built-in Flash
та Flash Exposure Compensation
You can set flash exposure compensation with the built-in flash or an
external, EOS-dedicated Speedllte as easily as normal exposure
compensation. The settable range is ±2 stops in 1/2-stop increments.
• Flash exposure compensation works in the Creative Zone modes.
Move the <►> arrow to the <03>
icon on the LCD panel.
• Press the <
FUNC.
> button to move
the arrow. (g>6)
ISO
<s>
•II)
m
-2.1.0.1.2*’
1
____
-2.1.t!>.1.2*^ ^
Negative compensation
-2.1.IP.1.2*^ ^
Set the flash exposure
compensation amount.
• Turn the <i^> or <0> dial to set
the amount.
• On the LCD panel, the plus side of
the scale indicates overexposure and
the minus side indicates
underexposure.
• To check the flash exposure
compensation amount that has been
set, press the
<FUNC.>
button to
display it on the LCD panel.
• The flash exposure compensation
amount remains in effect even after
the Command Dial is set to <<*©>.
• To cancel flash exposure
compensation, set the amount back
to <®>.
• Press the shutter button halfway to
return to normal camera operation.
76