Loading the compact power adapter ca-30 – Canon CA-30 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading the Compact Power
Make sure the power switch of the power adapter is
set at "0" (OFF), and the VTR switch of the Canon
Video Recorder VR-30 is OFF
Load the Compact Power Adapter CA-30 into the
battery chamber of the recorder as shown in the
diagram. A click wiii indicate that it is fully loaded
and locked in the recorder.
Plug the AC cord of the power adapter into an AC
Set the power adapter's power switch to "1" (ON).
Then set the VTR switch of the recorder to ON.
Unloading the Compact Power Adapter CA-30
1. Set the VTR switch of the recorder to OFF.
2. Set the adapter's power switch to "0".
3. Press the Battery Eject Button.
Monitoring the picture on the TV set during record
ing is possible by setting the VR-30 recorder's RF
output switch to ON and the Antenna Selector to
the VTR position.
When the VR-30 is not being used, always set the
VTR switch of the VR-30 to OFF and the adapter's
power switch to "0". Then unplug the AC cord from
the AC outlet.