Packing – Canon AS 6 User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
3. Gently wipe the 0-ring channel and the
battery magazine mating surface on the
camera with a clean, dry cloth.
4.
Install the 0-ring into the 0-ring groove
of the battery magazine.
-Packing
1. Open the back cover •, grasp the tab
at the bottom right corner of the packing,
and pull it out.
2.
Inspect the packing. If it has any
scratches, replace it. If it is dirty, wash it in
running water.
40
Advertising