Canon Z155 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Close the back cover.
^The film will automatically
advance to the first frame
on the roll.
AUTO
“1 ” is displayed on the
frame counter.
• If the frame counter shows
a blinking “
0
”, the film did
not load correctly. Load the
film again.
Q] • Use only film with DX-code. The camera will
automatically detect and set the film speed.
• A film speed of ISO 4tX) Is recommended.
• The film speed Is set to ISO 25 when non^DX film Is
loaded. If the film does not have a DX-code, Insert It Into
the film compartment, close the back cover and press
the shutter button once or twice.
• For slide (reversal) film, you can use DX-coded film
speeds of ISO 25, 50, 100, 200, 400, 800, 1600 and
3200.
[1-12