Replacing the remote control battery, Shooting with remote control – Canon Z155 User Manual
Page 32
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Shooting with Remote Control
• Shooting with remote controi may not be possibie if the
remote controi sensor on the camera is exposed to
sunlight or strong fluorescent light. If this happens, use
the self-timer to take the picture or move the camera to
another location.
• The camera’s remote control function may not operate
correctly if the camera is close to a fluorescent light
during signal reception. If this happens, move the
camera away from the fluorescent light.
Q] • Remote control shots can be taken for the 4 minutes
that Ci)f is displayed.
• Set the camera on a steady surface or use a tripod.
Replacing the Remote Control Battery
Replace the battery when you can no longer use the
remote control to take pictures.
Battery: one CR2032 lithium battery
•
1
Pull out the battery
holder.
• CD
Use a pen or other
pointed implement to push
in the release button
(D
as
you slide the battery holder
out
Load a new battery into
the holder and fit the
holder back into the
remote controi.
• Ensure that the + and -
terminals are positioned
correctly.