Removal from window, A caution – LG LP6010ER User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

(a) When window frame is iocated on inner siii.

• Install a wood strip (window width long and

window frame height high) on the inner sill.

SASH WINDOW

WINDOW FRAME

WOOD STRIP

OUTER

SILL

(b) When the window frame is higher than

19y32"(15mm)

• Install a wood strip (about 4"(102mm) long) on

the outdoor sill to raise support bracket.

WINDOW FRAME

I-

WOOD STRIP

OUTER

SILL

FIG. 9

REMOVAL FROM WINDOW

Turn off and unplug the air conditioner.

• Unscrew the side screws that you installed in Step 5.

6

.

• Close the curtain frame and remove foam seal and L

braoket from the windows.

• Keep a firm grip on the air as you the sash.
• Lift the air conditioner from the window and remove

the foam strip from between the windows.

• Remove the support bracket from window frame.

NOTE:

When cooling season is over, unit is removed

from window for cleaning and storage. There may still

be some condensation water in the basepan. Remove

the unit carefully to avoid water being spilled out on
floor. Always store unit flat on its base. Do not stand it

on its end. Be sure to remove support bracket, L

bracket, and foam seal from window and save.

Window will not close if support bracket remains

installed.

A CAUTION

• Air conditioners covered in this manual pose an

excessive weight hazard. Two or more people are

needed to move and install the unit.

To prevent injury or strain, use proper lifting and

carrying techniques when moving unit.

• When handling the air conditioner, be careful to

avoid cuts from sharp metal fins on front and rear
coils.

• Make sure air conditioner does not fall during

removal.

Advertising