Installation kits contents, Preparation of chassis – LG LW1010ER User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
Installation Kits Contents
NO.
NAME OF PARTS
Q'TY
1
FRAME CURTAIN
2
2
SILL SUPPORT
2
3
BOLT
2
4
NUT
2
5
SCREW (TYPE A)
13
6
SCREW (TYPE B)
3
7
SCREW (TYPE C)
5
8
FOAM-STRIP
1
9
DRAIN PIPE
1
10
FRAME GUIDE
2
11
WINDOW LOCKING BRACKET
1
12
FOAM-PE
1
SCREWDRIVER(Philips and Ratead), RULER, KNIFE, HAMMER, PENCIL, LEVEL
PREPARATION OF CHASSIS
1J
Remove the screws which fasten the cabinet at both
sides and at the back.
^ Siide the unit from the cabinet by gripping the base pan
handie and puiiing forward whiie bracing the cabinet.
^ Cut the window sash seai to the proper iength.
Peei off the backing and attach the Foam-PE ® to the
underside of the window sash.
(J) insert the Frame Guides @ into the bottom of the
cabinet.
^ insert the Frame Curtain © into the Upper Guide and
Frame Guides ®.
^ Fasten the curtains to the unit with 4 Type
A screws®.
Shipping
Screws
§ (Type A)
Owner’s Manual 13