Checkpoints before requesting for service, Lilil, Problems of product – LG GR-K09S User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
lilil
Checkpoints before requesting for service
When the
cooling does
not work at all
Is the power shut-down?
Is the power plug unplugged from
the outlet?
When using the step-up
transformer, is the power lamp of
the transformer on?
Is the installed location too hot
or cold?
Did you store hot food without
cooling it down?
Is the drawer completely closed?
Does it receive direct sunlight or is
near a heating device?
Is there an appropriate clearance
around the refrigerator?
Does the temperature of the
installed location go below 5”C?
Did you set the storing
temperature to "Min"?
Isn't the drawer basket
misassembled?
Is the floor of the installed location
soft or is the refrigerator installed
on an unstable floor? (It can make
noises on the wooden floor.)
Are there any objects on the top or
on the back of the refrigerator?
Problems of product
Check the power of the other
product.
Connect the power cord
properly to the outlet.
Turn off the power lamp of the
step-up transformer.
Install the refrigerator where
the external temperature is
between 5 and 43'C.
Cool down the hot food before
storing the food.
Adjust the height of the product
using the horizontal adjustment
leg so that the front part is
slightly higher. Put all the storing
food inside the drawer and
completely close the drawer.
Check the installed location.
Leave an appropriate clearance
around the refrigerator.
Refer to the installation method
and install where the
surrounding temperature is
above 5”C.
Set the storing temperature to
"Mid" or "Max".
Assemble so that the deodorizer
goes to the inner side.
Install the refrigerator where
the floor is firm and leveled.
Set the object properly.
f25ll