Achronix Speedster22i HD1000 Development Kit User Guide - Manual (Page 13)

UG034, July 1, 2014 13
Chapter 2
– General Description
In this chapter, you will learn the following about the ACX-BRD-HD1000-100G Development
Board:
ACX-BRD-HD1000-100G Development Board
Use Modes
On-board Memory
On-Board Controller
Board-specific Design Issues
ACX-BRD-HD1000-100G Development Board Picture
The development board has a PCIe form-factor with an 8” (203.2mm) width. It also has
dedicated power connectors. Figure 2 shows the ACX-BRD-HD1000-100G development
board with many of the key components annotated.
Figure 2: ACX-BRD-HD1000-100G Development Board Picture
12 V Main and Auxiliary
Power Supply Connectors
JTAG Header for
Bitporter Pod
Connectivity
Board Power
On/Off Switch
FPGA Soft
Reset Switch
Micro SD
Card Slot
SPI Flash
Memory on flip
side of board
(Not shown)
Programming
Header
Microcontroller
Speedster22i
HD1000 FPGA
USB
Connectors
Power
Regulators
Configuration related
LEDs
Configuration related
DIP switches
FPGA Configuration
Hard Reset Switch