Achronix Speedster22i HD1000 Development Kit User Guide - Manual (Page 32)

32 UG034, July 1, 2014
Signal Name SerDes No
Pin on HD1000
(U33)
Pin on
Receptacle (J2)
INTERLAKEN1_CLK1_N BB32 NA
INTERLAKEN1_RX_CLK_P NA A1
INTERLAKEN1_RX_CLK_N NA B1
FMC Expansion Port (HPC, J3)
You can use the FMC port to add other circuitry or functionality. Banks East Centre and West
North of the HD1000 provide the IOs for connections to the 400-pin SAMTEC ASP-134485-01
connector (J3) as shown in Figure 11. Table 7 shows the FMC interface pins and their
connections to the HD1000.
Table 7: ACX-BRD-HD1000-100G FMC Interface Pins
Signal Name Pin on HD1000 (U33) Pin on Connector (J3)
CLK_DIR_FMC AH44 B1
CLK0_M2C_P BC14 H5
CLK0_M2C_N BB14 H4
CLK1_M2C_P BA14 G3
CLK1_M2C_N AY14 G2
CLK2_M2C_P AW14 K5
CLK2_M2C_N AV14 K4
CLK3_M2C_P AY38 J3
CLK3_M2C_N AW37 J2
GBTCLK0_M2C_P D4
GBTCLK0_M2C_N D5
GBTCLK0_M2C_P B21
GBTCLK0_M2C_N B20
FMC_CLK_M2C_P0 AY25
FMC_CLK_M2C_N0 AW25
FMC_CLK_M2C_P1 AY26
FMC_CLK_M2C_N1 AW26
FMC_CLK_M2C_P2 BC25
FMC_CLK_M2C_N2 BB25
FMC_CLK_M2C_P3 BC26
FMC_CLK_M2C_N3 BB26
FMC_CLK_M2C_P4 AY28
FMC_CLK_M2C_N4 AW28
VDDL_PG D1
POWER_GOOD_M2C AH45 F1
PRSNT_M2C_L AJ45 H2
SPD_FMC_SCL AJ42 C30
SPD_FMC_SDA AJ43 C31
FMC_TCK D29
FMC_TDI D30
FMC_TDO D31
FMC_TMS D33