Acolyte DMX - Manual (Page 24)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
W R I T I N G T H E S TA N D A L O N E M E M O R Y
Adding your programming to the controller is as simple as dragging and dropping.
- select the area you wish to use
- drag the scene from the scenes panel and onto a controller scene or one of the SLESA memory blocks
To copy all scenes within a page at one, right click the interface image and select “Assign All Scenes”.
Note: Only scenes dragged to the interface will be written. This includes scenes with calendar and port triggers.
PA G E 2 3