Acolyte DMX - Manual (Page 5)

All artwork and images copyright Acolyte Industries Inc.
Use or reprinting prohibited unless explicitly approved by Acolyte Industries.
PA G E 4
I N S TA L L AT I O N
1
3
2
Mount an electrical box inside the wall.
The controller can be installed in any
standard electrical gang box. If you use
a double size box, you can insert the
power supply inside.
Mount the back of the controller on the wall using 2 or more
screws.
Plug the green terminal block into the back of the front panel.
Snap the front panel onto the back and lock with a screw into
the bottom of the front panel.
Connect the wires.
DMX: Connect the DMX cable to the
external DMX interface.
Power: Connect the included 9V DC
power supply. The cable with the white
stripe is DC+.