AVer M30(310AF) user manual - Manual (Page 22)

ENGLISH
19
OSD Menu Description
LANGUAGE
ENGLISH
FRANÇAIS
ESPAÑOL
PORTUGUÊS
日本語
繁體中文
SETTING > LANGUAGE
Use ▲or▼ to select from different supported languages then
press ENTER to make the selection.
USB CONNECTION SETTING > USB CONNECTION
Use ▲or▼ buttons to select the function of USB between USB
CAMERA and IMG DOWNLOAD. Then press ENTER.
USB Camera - can be used as a computer webcam or with
our bundled software to record video and capture still image.
Img Download - transfer the captured images from the built-
in memory to computer hard disk.
USB CAMERA
IMG DOWNLOAD
FLICKER SETTING > FLICKER
Use ▲or▼ to select between 50Hz or 60Hz. Some display
devices cannot handle high refresh rates. The image will flicker
a couple of times as the output is switched to another refresh
rate.
50 HZ
60 HZ
DEFAULT
NO
YES
SETTING > DEFAULT
Use ▲or▼ to select YES to restore to original factory default
setting or NO to exit then press ENTER to make the selection.
MENU
CONTRAST
BRIGHTNESS
FORMAT MEMORY
RESOLUTION
LANGUAGE
USB CONNECTION
FLICKER
DEFAULT
PROFILE 92
32
NO
1024 X 768
ENGLISH
USB CAMERA
60 HZ
NO
OFF
IMAGE SETTING
SETTING > PROFILE
Press ENTER and use ▲or▼ to select between SAVE or
RECALL. Then press ENTER again to make a selection.
SAVE - store the current setting in the selected profile number.
Only effect, mode, brightness and contrast settings can be
saved.
RECALL - restore the setting back to the selected profile
number.
In the SAVE/RECALL selection, use ▲or▼ to select
saving/restoring the setting from the three profile number then
press ENTER.
PROFILE
SAVE
RECALL
PROFILE
SAVE PROFILE 1
PROFILE 2
PROFILE 3
RECALL PROFILE 1
PROFILE 2
PROFILE 3