Making the connections, English – AVer M30(310AF) user manual User Manual
Page 8
ENGLISH
5
M
M
a
a
k
k
i
i
n
n
g
g
t
t
h
h
e
e
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
s
s
The ports on the back and side panel of the AVerVision M30 enable you to connect the
unit to a computer, graphics display monitor or LCD/DLP projector, TV or other device.
Illustrated below are the ports that are located at the back and side panel of the
AVerVision M30 with their corresponding labels.
TV R
GB
VID
EO
S-V
IDEO
DVI
(2)(3)
(4)
(5)
(6)(7)
(8)
(1)
(9)
(10)
VGA O
UT
VGAIN
DC12V
LIGHT
BOX
Port
Description
(1) Antitheft Slot
Attach a Kensington compatible security lock or antitheft
device.
(2) DC 12V (input)
Connect the power adapter into this port.
(3) Light Box Port
Plug the optional light box into this port.
(4) VGA IN Port
Input RGB signal from a computer or other sources and
actively pass it through to the VGA output port only.
Connect this port to the VGA output port of the computer.
(5) VGA OUT Port
Output RGB signal from the camera, VGA input port, or the
captured images from the memory on a VGA/Mac monitor
or LCD/DLP projector.
(6) TV/RGB Switch
Set to select the between RGB (VGA Out) or TV
(Composite Video/S-Video Out) display output.
(7) VIDEO Port
(RCA/Composite)
Output the signal from the camera or the captured images
from the built-in memory on TV or video equipment.
(8) S-VIDEO Port
Output the signal from the camera or the captured images
from the memory on TV or video equipment.
(9) DVI Port
Output video signal from the camera, or the captured
images from the memory on an LCD monitor or LCD/DLP
projector with DVI interface.
(10) USB Port
Use AVerVision M30 as a USB Camera or Image
Download allowing you to transfer the captured images to
and from the AVerVision M30 built-in memory and PC.