AVer SF1031W - Manual (Page 12)

4
1.5 LED Indicators
The PWR and LNK LED indicators provide the several statuses as the below table listing:
PWR POWER
„ Lighting in Blue: IP camera is power on.
„ Light Off: IP camera is power off.
WPS
„ Success: Lighting and then reboot automatically.
„ Fail: Blinking about 10 sec, and then reboot automatically.
LNK Link
„ Lighting in Orange: Ethernet link is valid.
„ Blinking: Data is transmitted or received through the Ethernet link.
1.6 Rear Panel
1.6.1 SF1301W
Connect the power adapter cord and network cables on the rear panel. The reset button is also located on the
back of the device.
Name Function
(1) Ethernet port For connecting to Ethernet LAN. The port is auto MDI-II/MDI-X and auto-negotiation for port
speed.
(2) Antenna For attaching the antenna that included in package.
(3) Reset button Press to restore to the factory default setting.
(4) Audio line out For connecting the audio out device such as speaker.
(5) DC power For connecting the power adaptor.
Link indicator
Power indicator