Chapter 3 using the camera web manager, 1 first time to use the ip camera – AVer SF1031W User Manual
Page 17
9
Chapter 3 Using the Camera Web Manager
The IP camera can be managed by using the web browser through the internet. It is recommended to check
and make sure the accessing of the IP camera before installing it at the location, especially if it is mounted to a
ceiling or other area that is difficult to physically access.
3.1
First Time to Use the IP Camera
For the first time, using the IPCamWizard to initialize the IP camera. Follow the below steps to initial the IP
camera:
1. Place the installation CD into the CD-ROM drive then click IPCamWizard to install it.
2.
To run the IPCamWizard, click Start > Program > NetworkServeillance > IPCamWizard.
i
Please make sure the IP camera is installed on your network.
3. Click
to go to next step. To exit, click
.