B&M 45163 PRECISION SPORT SHIFTER - 03 - 05 NISSAN 350Z - Manual (Page 2)

Socket(10 & 12mm) Socket Drive/
Torque Wrench
Extension
Channel Locks
D I S A S S E M B L Y
Hex Drive (5 mm) Towel
File
Jack Jack Stands (4)
STEP 2. Lift up console plate.
STEP 1. Park vehicle on a level area and allow time to cool.
Unscrew knob and remove. Also, remove small
insert under knob (will not be used on new shifter).
TOOLS: Channel Locks & Towel.
NOTE: In some vehicles it may be VERY difficult to
remove the shift knob without damaging it. If
this is the case in your vehicle, it may be
possible to proceed through all the disassembly
steps carefully lifting up on the center console
plate and rubber boots to access the hardware.
Then finally removing the knob as described in
the final disassembly step 13.
STEP 3. Unplug wiring harness from console plate and
remove console plate.
TOOLS