B&M 81025 CONSOLE QUICKSILVER SHIFTER FOR 1968-1969 CAMARO(AUTOMATIC TH-350 & 400) - Manual (Page 8)

TOOL LIST
(1) Floor Jack and Jack Stands (1) 13/32” Socket (1) 3/16” Hex Key
(1) Phillips Screwdriver (1) 7/16” Socket (1) Wire Cutter
(1) Micro Phillips Screwdriver (1) 1/2” Socket (1) Electrical Tape
(1) Micro Flat Head Screwdriver (1)1/4” Wrench
(1) Ratchet or Speed Handle (1) 1/2” Wrench
(1) 10mm Socket (1) 7/16” Wrench
(1) 13mm Socket (1) 5/64” Hex Key
WARNING!
Periodic inspection and maintenance of your B&M Quicksilver shifter is recommended to ensure that the
mechanism is well lubricated, free from dirt or rust and the cable is properly adjusted. Lack of maintenance
could result in a failure includng a failure of the reverse lockout safety feature.
8
CHECK LIST
1) Cable is securely fastened to shifter and e-clip is in place.
2) Shifter and brackets are securely mounted to the floorboard by all eight mounting bolts.
3) Cable hole is sealed shut.
4) Cable is routed clear of exhaust system and moving parts.
5) Shifter is adjusted properly and spring clip is in place on transmission cable swivel.
6) The neutral safety switch is connected and functioning to prevent engine starts in drive gears and reverse.
7)There is no debris or dirt in the shifter mechanism.
8) Indicator clearly visible.
9) Knob is tight on shifter handle.
10) Shifter locks in Park and handle must be lifted to engage Reverse.
11) Shifter moves smoothly and freely through all positions as described in Shifter Operation.
Knob
Boot
Cable adapter
Shifter Mechanism
Mounting Bracket
Shifter Cover