Salter Brecknell MBS Series User Manual
Page 3
A copy of the original signed Declaration of Conformity is available on
request.
Declaration of Conformity
Manufacturer
Salter Brecknell
Type
MBS
Corresponds to the requirements of the following EC directives:-
Electro Magnetic Compatibility
Low Voltage Directive:
EMC 89/336/EEC
LVD 2006/95/EC
The application harmonised standards
are:
EN60950-1: 2002, EN61000-6-3: 2001
EN61000-6-1:2007
©Avery Weigh-Tronix group of companies 2009. All rights reserved.
No part of this publication may be reproduced, stored in an electronic
retrieval system, or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise without the prior
written consent of the copyright owner, or as permitted by law or under
licence. Full acknowledgment of the source must be given.
Salter Brecknell is a registered trade mark of the Avery Weigh-Tronix
group of companies. This publication was correct at the time of going to
print however, Avery Weigh-Tronix reserves the right to alter without
notice the specification, design, price or conditions of supply of any
product or service at any time.