Salter Brecknell PS500 - Manual (Page 10)

5.10) P10.x: Calibration unit
x=0: kg as calibration unit
x=1: lb as calibration unit
As per the setting of P8, P9 and P10, following table is listed,
Table3: Kg calibration unit:
Display division value in different weight unit that can be used Calibration
division value
kg lb Lb:oz (oz)
0.0001kg 0.0001kg 0.0002lb Not available
0.001kg 0.001kg 0.002lb Not available
0.01kg 0.01kg 0.02lb 0.5oz
0.1kg 0.1kg 0.2lb 5 oz
1kg 1kg 2lb Not available
10kg 10kg 20 lb Not available
0.0002kg 0.0002kg 0.0005 lb Not available
0.002kg 0.002kg 0.005 lb 0.1 oz
0.02kg 0.02kg 0.05 lb 1 oz
0.2kg 0.2kg 0.5 lb Not available
2kg 2kg 5 lb Not available
20kg 20kg 50 lb Not available
0.0005kg 0.0005kg 0.001 lb Not available
0.005kg 0.005kg 0.01 lb 0.2 oz
0.05kg 0.05kg 0.1 lb 2oz
0.5kg 0.5kg 1 lb Not available
5kg 5kg 10 lb Not available
50kg 50kg Not available Not available
Table4: Lb calibration unit:
Display division value in different weight unit that can be used Calibration
division value
kg lb Lb:oz (oz)
0.0001lb Not available 0.0001lb Not available
0.001 lb 0.0005 kg 0.001 lb Not available
0.01 lb 0.005 kg 0.01 lb 0.2 oz
0.1 lb 0.05 kg 0.1 lb 2 oz
15
1 lb 0.5 kg 1 lb Not available
10 lb 5 kg 10 lb Not available
0.0002 lb 0.0001 kg 0.0002 lb Not available
0.002 lb 0.001 kg 0.002 lb Not available
0.02 lb 0.01 kg 0.02 lb 0.5 oz
0.2 lb 0.1 kg 0.2 lb 5 oz
2 lb 1 kg 2 lb Not available
20 lb 10 kg 20 lb Not available
0.0005 lb 0.0002 kg 0.0005 lb Not available
0.005 lb 0.002 kg 0.005 lb 0.1 oz
0.05 lb 0.02 kg 0.05 lb 1 oz
0.5 lb 0.2 kg 0.5 lb Not available
5 lb 2 kg 5 lb Not available
50 lb 20 kg 50 lb Not available
5.11) P11.x: select the weighing unit that may be chosen by pressing UNIT
x=0:
only kg
x=1: only lb
x=2: only lb: oz
x=3: kg or lb
x=4: kg or lb: oz
x=5: lb or lb: oz
x=6: kg, lb, or lb: oz
Above setting of units may not be available as per above tables in 5.10
5.12) P12.x: Power-on zero-point range
x=0: the range is set to calibration zero point (CAL.P0) +1%FS
x=1: the range is set to calibration zero point (CAL.P0) +2%FS
x=2: the range is set to calibration zero point (CAL.P0) +5%FS
x=3: the range is set to calibration zero point (CAL.P0) +10%FS
x=4: the range is set to calibration zero point (CAL.P0) +20%FS
x=5: the range is set to calibration zero point (CAL.P0) +50%FS
x=6: the range is set to calibration zero point (CAL.P0) +100%FS
16