Salter Brecknell 7840 - Manual (Page 33)

Model 7800 Family Weight Classifiers User’s Manual 33
H<CR>
Scale Response
<LF>xxxx.xxxuu<CR>
<LF>hh<CR><ETX>
Results
Returns decimal wt in 10x with units plus scale
status.
d<CR> (for factory diagnostics only)
Scale Response
xxxxxx (div-A) <CR>
or
xxxxxx (div-n) <CR>
Results
Returns weight normalized to 100,000 division
with AZT on/off. Protocol must be set for NCI and
the scale must be in the “DIAG” (diagnostics)
sub-menu. Otherwise, the scale will respond with
the unrecognized command response.
All other commands
Scale Reponse
<LF>?<CR><ETX>
Results
Unrecognized command
Contact Customer Service for protocol details or
visit our website at www.wt-nci.com
Optional Commands