Salter Brecknell 7840 - Manual (Page 9)

Model 7800 Family Weight Classifiers User’s Manual 9
When the scale is first powered on, it will perform
a test sequence. During this sequence, the
display will show the following:
• The model number and the software
revision level.
• A numeric counting test for all segments of
the display. During this test, a test of
Random Access Memory (RAM) and a test
of Read Only Memory (ROM) is performed.
If everything is OK, the display will show zero
weight and the scale is ready for use.
1. With the scale powered on, make sure the
scale platter is empty and the display is at
zero. If it is not, press the ZERO key...
0.00 is displayed.
2. Place an item to be weighed on the scale
platter...
The scale will display the gross weight.
3. Remove the item from the scale platter.
Operation
Power Up Test Sequence
If RAM or ROM error
is reported, you must
press the TEST key to
acknowledge the
condition. See Error
Codes section.
Performing a Normal
Weighment
When first powered
on, if the scale is
outside the ± 10% zero
window, center dashes
are displayed. “- - - -”
If necessary, reapply
power to reset the
initial zero setting.
Refer to the Trouble-
shooting section if the
problem persists.