Salter Brecknell 7050 - Manual (Page 12)

To perform a bulk sampling operation the first
step is to obtain the average weight of each
piece or the piece weight, abbreviated as pcwt.
You can key in a known piece weight or obtain a
piece weight by sampling.
Sampling consists of placing a known number
of pieces on the scale and letting the scale
determine the individual piece weight. The
Bulk Sampling Operations
Sampling Overview
4. Place the material to be weighed in the
container. . .
Net weight is displayed.
5. To remove the tare weight from memory,
empty the scale platform and press the
TTTTTARE
ARE ARE ARE ARE key. . .
Scale returns to gross weighing mode.
To enter a known tare weight, follow these steps:
1. Key in the known tare weight on the
numeric keypad. . .
When you press a numeric key, the
softkey selections change. One of the
softkeys is TTTTTARE
ARE ARE ARE ARE.
2. Press the TTTTTARE ARE ARE ARE ARE softkey. . .
The keyed in value becomes the active
tare weight and the display changes to
net weighing mode.
To remove an active tare weight, empty the
scale platform and press the TTTTTARE
ARE ARE ARE ARE key or key
in 00000 on the numeric keypad and press the
TTTTTARE
ARE ARE ARE ARE softkey. The display returns to gross
weighing mode.
Entering a Known
Tare Weight
Removing an Active
Tare Weight
9