CDI Torque TORQUE WRENCHES Dial Type - Manual (Page 6)

Page 3
INTRODUCTION
This manual covers the repair, maintenance and troubleshooting instructions to identify
and remedy problems that could occur with the CDI Dial Indicating Torque Wrenches.
Each wrench model has an Exploded Illustration that lists the component parts and shows
assembly particulars. The exploded illustration must be used as a guide for assembling
CDI Dial Indicating Torque Wrenches.
CDI has a Service Center that performs repairs and calibration on all of our products at
the factory, plus a list of factory authorized repair/calibration centers throughout the
world. Contact CDI Sales or Service Center at (626) 965-0668 or
[email protected]
for technical assistance on the repair or calibration of CDI products.
CLEANING
Wipe all exterior parts with a dry, clean and lint free cloth. DO NOT USE any abrasive
or corrosive materials to clean any components of the CDI Dial Indicating Torque
Wrenches. A non-abrasive polishing agent applied with a dry, clean and lint free cloth
may be used to polish the chrome exterior parts.
LUBRICATION
None required.
REPAIR TOOLS REQUIRED
* Torque Tester (range determined by the torque wrench to be tested)
1 Flat blade mini screwdriver (max. blade size .063 or 1.6mm)
1 Needle Nose Pliers
1 Dial Scale Assembly Tool
1 Pointer Tapping Tool
1 Dial Wrench Adjustment Tool (part # 600-2)
1 Screwdriver
•
We recommend that CDI torque testers be used to test the calibration
accuracy of CDI manufactured torque products.
CDI manufactures a complete line of torque testing equipment from moderately
priced testers to complete state of the art test systems used in metrology calibration
laboratories all over the world. Contact CDI Sales or Service Center at (626) 965-
0668 or [email protected].